產品特性及應用：
本系列產品是適用于絲網印刷工藝施膠，液態膠水的粘度高，硬度適中，加溫固化型液態硅橡膠，具有優異的耐氣候老化等特性。可在-50~+200℃度長期使用，化學穩定性好環保無毒，固化穩定后可達到FDA食品級及檢測認證。適用內衣布料粘合，在粘合加溫固化后粘合布料穩固，收縮率低，強度高，韌性好的透明膠體。用在貼身內衣上環保安全。通過線條設計粘合在內衣上穿著舒適，塑出好身段。
Product characteristics and application:
This series product is suitable for screen printing craft glue, liquid glue viscosity is high, moderate hardness, heat type of liquid silicone rubber, excellent weathering resistance and other properties. Can be long-term use in -50 ~ + 200℃ degrees, the chemical stability is good environmental protection non-toxic, curing stability can be achieved after the FDA food grade and testing certification. Used underwear fabrics adhesion, solid bonding cloth after bonding heat curing, low shrinkage, high strength, toughness good transparent colloid. With environmental safety in lingerie. By line design bonding on the underwear, wear comfortable, creates a good figure.
使用方法：
1、清潔：用膠前將使用設備與粘膠布料清理干凈；
2、施膠：將A組份和B組份按1：1（重量比）的配比充分混合均勻。（建議使用設備混合，不用脫泡）混合不均勻會出現固化不完全或物理性能減弱。本品使用時允許的操作時間一環境溫度有關，溫度高，操作時間會減短。詳細的操作時間參考產品型號說明。印刷施膠效果好壞與網版設計，膠水粘度，設備調試等因素密切相關。請在生產前做好必要測試；
3、本品易被分子中含P（磷）·S（硫）·NH3（氨）元素的化合物毒化而影響產品的固化，使膠體中的固化劑減少影響固化，用時須注意清潔，防止混入雜質。請在批量使用前做必要性測試。
Usage method cleaning:
1. Clean: with glue will use the equipment before and viscose fabrics clean;
2. Sizing: will a component and b components according to the ratio of 1:1 (weight ratio) of fully mixing. (it is recommended to use the equipment without deaeration) can appear uneven curing incomplete or physical properties. When using this product allows the operation time of the environment temperature, high temperature, operation time will be cut short. Detailed operating time reference product model specifications. Printing sizing effect is good or bad and the screen design, glue viscosity, equipment debugging and other factors are closely related. Please make necessary testing before production.
3. This product is easy to be molecules containing P(p), S (sulfur), NH3 (ammonia) element compounds poison and affect product curing, the curing agent in the gel can reduce affect curing, it must pay attention to clean, prevent the mixed with impurities. Please do need to test before batch use.
儲運及注意事項：
1、本產品應密封儲存于干燥通風處（5~25℃），防止雨淋及日光曝曬；
2、在正常存儲環境下儲期查看相關產品型號說明；
3、產品開土封后應盡快用完，未用完產品需密封放于安全環境；
4、絲網印膠要注意用后清洗網版，未用完膠水清理好放進密封容器內放在-5℃的冰箱內保存12小時，下次解凍后使用；
5、本產品為非危險品，可按一般化學品儲存運輸。
Storage and transportation and matters needing attention:
1. This product should be sealed storage in a dry ventilated place (5 ~ 25℃), prevent the rain and sun exposure.
2. Under normal storage environment storage period to check the relevant product model specifications.
3. The product should be finished as soon as possible after open soil sealing, not finished products need to be sealed in a safe environment.
4. Silk screen printing glue must pay attention to the screen cleaning after using, glue not use up clean up into a sealed container in - 5℃ refrigerator for within 12 hours, the next time used after thawing.
5. This product is a non-dangerous goods, according to the general chemical storage transport.
包裝規格：
本產品A、B分別采用20或200公斤桶包裝。
This product is packed in plastic drum: Glue A and B is 20kg/pc or 200kg/pc
存儲期：
5℃～25℃的陰涼干燥處儲存，詳細的儲存期查看相關型號說明。
Storage period :5℃~25℃ in a cool and dry place to store,
the shelf life of detailed view the related models.
