SiliconeQK-3012
First,the characteristics of the product
SiliconQK-3012is transparenttwo-component,high strength,high transparency,hightearresistance,soft hand feeling,strong adhesion,small shrinkage rate,operationaltime up to 20 hours ofnewsilicone
labelrubber;new materialused in Japanadvanced technology(is currently widely used in thethree-dimensionaltrademark printing,clothing.Printerribbon,silk screenprinting,qualityproducts).Forvery
complex shapeandhigh precisionmodel.
Two,property
★ hightransparent;
★small
shrinkage;
★two method:
(1),the standard type(2),the
machinemixing
★ifmaking speedto control orslow downtothe
deployment ofcuring agentamount;
★ifmaking speedto control orslow downtothe
deployment ofcuring agentamount;
Three,application
★suitable forcloth standard,anti-counterfeit trademarksandsilk
screenprintingsilica gel;
★suitable for
environmental protectionbrand
trademark,stereoscopic trademark;
Control
device,moresuitable for automobile industryheatingdevice,decorative lights,etc..
Four,technical indicators
Transparent
The
proportion(23 ° C)1.09
Hardness(type A)30
The tensilestrength of Mpa(kgf/cm2)6.8(65)
Elongation% 580
The tearingstrength of N/mm(kgf/cm)38(25)
Linear
shrinkage(24 hours)% <0.1
Linear
shrinkage(72 hours)% <0.1
Five,instructions for use
TheA,Bagent10:1 by weightare mixed uniformly,andvacuum
exhaustbubble.
Thecuring time and temperature:205 ° C/15-40seconds(for reference only,please considerthe actual operation.).
●operatingtime is 20 hours.
Six,packaging
Theproduct packaging for 20kg/.
Direction
for use :
Use
ratio of A and B = now, before the use should be A, B component in proportion
to fully mix evenly, quiet place TuoPao or vacuum TuoPao.
Don't
touch the containing N, P, S plasma compounds and contain alkynyl and vinyl
compounds, lest make, platinum catalyst poisoning and cannot cure, especially
PVC contains Pb (lead), can make the catalyst poisoning some organic pigments
can also lead to curing slowed or not curing.
